What To Know
- In this comprehensive guide, we will delve into the intricacies of how to clean Shark Navigator Lift Away, ensuring it remains a reliable cleaning companion for years to come.
- To clean the pre-motor filter, remove it from the vacuum cleaner and rinse it under warm water until the water runs clear.
- To clean the post-motor filter, remove it from the vacuum cleaner and tap it against a hard surface to dislodge any accumulated dust.
The Shark Navigator Lift Away is a versatile vacuum cleaner that combines power and convenience. However, to maintain its optimal performance, regular cleaning and maintenance are essential. In this comprehensive guide, we will delve into the intricacies of how to clean Shark Navigator Lift Away, ensuring it remains a reliable cleaning companion for years to come.
Understanding the Shark Navigator Lift Away
Before embarking on the cleaning process, it’s crucial to familiarize yourself with the components of your Shark Navigator Lift Away. The vacuum cleaner consists of several key parts:
- Dust Cup: The dust cup collects dirt, debris, and allergens during vacuuming.
- Filters: The Shark Navigator Lift Away utilizes two filters: a pre-motor filter and a post-motor filter. These filters trap fine particles and prevent them from recirculating into the air.
- Brushroll: The brushroll agitates the carpet fibers, effectively removing embedded dirt and debris.
- Swivel Steering: The swivel steering allows for effortless maneuverability, enabling you to navigate around furniture and obstacles with ease.
Step-by-Step Cleaning Guide
1. Empty the Dust Cup: After each use, empty the dust cup to prevent it from becoming overloaded and affecting suction power. To do this, press the dust cup release button and lift the dust cup out of the vacuum cleaner. Empty the contents into a trash can and tap the dust cup to remove any remaining debris.
2. Clean the Filters: Regularly cleaning the filters is essential for maintaining optimal suction power and preventing unpleasant odors. To clean the pre-motor filter, remove it from the vacuum cleaner and rinse it under warm water until the water runs clear. Allow the filter to air dry completely before reinstalling it. To clean the post-motor filter, remove it from the vacuum cleaner and tap it against a hard surface to dislodge any accumulated dust. You can also rinse the post-motor filter under warm water if necessary. Allow the filter to air dry completely before reinstalling it.
3. Remove Hair and Debris from the Brushroll: Hair and debris can wrap around the brushroll, hindering its performance. To clean the brushroll, turn the vacuum cleaner upside down and locate the brushroll cover. Remove the cover and use a pair of scissors to cut away any tangled hair or debris. Once the brushroll is clear, reinstall the cover.
4. Inspect the Swivel Steering: The swivel steering mechanism should move smoothly and freely. If you notice any stiffness or resistance, inspect the swivel steering for any obstructions or damage. Clean the swivel steering with a damp cloth and apply a small amount of lubricant if necessary.
Additional Maintenance Tips
1. Check the Belts: The Shark Navigator Lift Away utilizes belts to drive the brushroll and other components. Regularly inspect the belts for signs of wear or damage. If you notice any fraying or cracking, replace the belts immediately to prevent them from breaking and causing further damage.
2. Clean the Exterior: Wipe the exterior of the vacuum cleaner with a damp cloth to remove dust and debris. Pay particular attention to the crevices and corners where dirt can accumulate.
3. Store Properly: When not in use, store the Shark Navigator Lift Away in a cool, dry place. Avoid exposing the vacuum cleaner to direct sunlight or extreme temperatures, as this can damage the components.
Troubleshooting Common Issues
1. Loss of Suction Power: If you notice a decrease in suction power, check the dust cup, filters, and brushroll for any obstructions or blockages. Clean or replace these components as necessary.
2. Vacuum Cleaner Not Turning On: Ensure that the vacuum cleaner is properly plugged into a working outlet. Check the power cord for any damage or breaks. If the power cord is damaged, replace it immediately.
3. Unusual Noises: If you hear unusual noises coming from the vacuum cleaner, inspect the brushroll and other moving parts for any obstructions or damage. Clean or replace the affected components as necessary.
The Bottom Line
By following these comprehensive steps, you can effectively clean and maintain your Shark Navigator Lift Away, ensuring it continues to deliver exceptional cleaning performance for years to come. Regular cleaning and maintenance will extend the lifespan of your vacuum cleaner and keep your home sparkling clean.
Quick Answers to Your FAQs
Q: How often should I clean the Shark Navigator Lift Away?
A: It’s recommended to empty the dust cup after each use and clean the filters and brushroll at least once a month.
Q: What type of cleaner should I use to clean the filters?
A: Use a mild detergent or dishwashing liquid mixed with warm water to clean the filters. Avoid using harsh chemicals or abrasive cleaners.
Q: Where can I find replacement filters for the Shark Navigator Lift Away?
A: Replacement filters can be purchased from authorized Shark retailers or online stores.
