What To Know
- The inlet filter is located at the bottom of the vacuum cleaner, and it helps to protect the motor from dust and debris.
- The exhaust filter is located at the back of the vacuum cleaner, and it helps to trap dust and particles before they are expelled into the air.
- Use a damp cloth to wipe down the exterior of the vacuum cleaner, paying special attention to areas that are prone to dirt and dust buildup, such as the wheels and the handle.
The Shark Navigator Lift-Away Canister is a powerful and versatile vacuum cleaner that makes cleaning your home a breeze. However, like all vacuums, it needs to be cleaned regularly to maintain its performance and prevent any damage. In this comprehensive guide, we will walk you through the step-by-step process of cleaning your Shark Navigator Lift-Away Canister, ensuring it operates at its best.
1. Empty the Dust Cup
The first step in cleaning your Shark Navigator Lift-Away Canister is to empty the dust cup. To do this, locate the dust cup release button, which is typically located on the top or side of the vacuum cleaner. Press the button and pull the dust cup straight up to remove it from the vacuum. Once removed, empty the contents of the dust cup into a trash can.
2. Clean the Dust Cup Filter
Once the dust cup is empty, you need to clean the dust cup filter. The filter is responsible for trapping fine dust and particles, and it should be cleaned regularly to maintain its effectiveness. To clean the filter, remove it from the dust cup by pulling it straight out. Rinse the filter under warm water until the water runs clear. Allow the filter to air dry completely before reinserting it into the dust cup.
3. Clean the Brush Roll
The brush roll is another important component of your Shark Navigator Lift-Away Canister that needs to be cleaned regularly. The brush roll agitates the carpet fibers to loosen dirt and debris, and it can become clogged with hair, dust, and other particles over time. To clean the brush roll, remove it from the vacuum cleaner by following the instructions in your vacuum’s user manual. Once removed, use a pair of scissors to cut away any hair or debris that is wrapped around the brush roll. You can also use a damp cloth to wipe the brush roll clean. Allow the brush roll to air dry completely before reinserting it into the vacuum cleaner.
4. Clean the Inlet Filter
The inlet filter is located at the bottom of the vacuum cleaner, and it helps to protect the motor from dust and debris. To clean the inlet filter, remove it from the vacuum cleaner by following the instructions in your vacuum’s user manual. Once removed, rinse the filter under warm water until the water runs clear. Allow the filter to air dry completely before reinserting it into the vacuum cleaner.
5. Clean the Exhaust Filter
The exhaust filter is located at the back of the vacuum cleaner, and it helps to trap dust and particles before they are expelled into the air. To clean the exhaust filter, remove it from the vacuum cleaner by following the instructions in your vacuum’s user manual. Once removed, rinse the filter under warm water until the water runs clear. Allow the filter to air dry completely before reinserting it into the vacuum cleaner.
6. Clean the Exterior of the Vacuum Cleaner
Once you have cleaned the internal components of your Shark Navigator Lift-Away Canister, you should also clean the exterior of the vacuum cleaner. Use a damp cloth to wipe down the exterior of the vacuum cleaner, paying special attention to areas that are prone to dirt and dust buildup, such as the wheels and the handle. Allow the vacuum cleaner to air dry completely before storing it.
7. Store the Vacuum Cleaner Properly
When you are finished cleaning your Shark Navigator Lift-Away Canister, store it in a cool, dry place. Avoid storing the vacuum cleaner in direct sunlight or in areas where it will be exposed to extreme temperatures. Store the vacuum cleaner with the cord wrapped around the cord wrap, and make sure that the dust cup and filters are empty and clean.
Wrapping Up: Maintaining Your Shark Navigator Lift-Away Canister
By following the steps outlined in this guide, you can easily clean your Shark Navigator Lift-Away Canister and keep it operating at its best. Regular cleaning will help to extend the life of your vacuum cleaner and ensure that it continues to provide you with a powerful and effective cleaning performance.
Answers to Your Questions
Q: How often should I clean my Shark Navigator Lift-Away Canister?
A: You should clean your Shark Navigator Lift-Away Canister after each use, or at least once a week if you have pets or allergies.
Q: What is the best way to clean the brush roll?
A: The best way to clean the brush roll is to remove it from the vacuum cleaner and use a pair of scissors to cut away any hair or debris that is wrapped around it. You can also use a damp cloth to wipe the brush roll clean.
Q: How do I know when the filters need to be cleaned?
A: You should clean the filters when they become dirty or clogged. You can check the filters by removing them from the vacuum cleaner and inspecting them for dirt and debris buildup.
