Renew Your Cleaning Routine: How To Clean Your Shark Professional Vacuum For Optimal Efficiency

Maintaining a clean Shark Professional vacuum is crucial for ensuring optimal performance and extending its lifespan. Regular cleaning and maintenance will prevent dirt, debris, and hair from accumulating, which can hinder suction power and cause damage to the vacuum’s components. This comprehensive guide will provide you with step-by-step instructions on how to clean a Shark Professional vacuum, ensuring it operates at its best.

1. Empty the Dust Cup:

1. Locate the Dust Cup: Identify the dust cup, usually located at the top or bottom of the vacuum. It is typically a transparent container that collects dirt and debris.

2. Remove the Dust Cup: Press the dust cup release button or lever to detach it from the vacuum.

3. Empty the Contents: Open the dust cup over a trash can and empty its contents. Ensure all dirt, debris, and hair are removed.

2. Clean the Dust Cup Filter:

1. Locate the Filter: Inside the dust cup, you will find a filter. It is usually a cylindrical or rectangular-shaped component made of foam or fabric.

2. Remove the Filter: Carefully remove the filter from the dust cup.

3. Rinse the Filter: Rinse the filter under lukewarm water until the water runs clear. Avoid using hot water or harsh detergents, as they can damage the filter.

4. Air Dry the Filter: Allow the filter to air dry completely before reinstalling it. Do not use a dryer or heat source to speed up the drying process.

3. Clean the Brushroll:

1. Locate the Brushroll: The brushroll is a rotating cylinder with bristles located at the bottom of the vacuum. It is responsible for agitating and loosening dirt from carpets.

2. Remove the Brushroll Cover: Depending on your Shark Professional vacuum model, you may need to remove a few screws or press a release button to access the brushroll.

3. Remove the Brushroll: Carefully lift the brushroll out of the vacuum.

4. Clean the Brushroll: Use a pair of scissors or a utility knife to remove any hair or debris wrapped around the brushroll. You can also use a vacuum cleaner hose attachment to remove loose dirt and debris.

5. Inspect the Brushroll: Check the brushroll for any signs of damage, such as worn or broken bristles. Replace the brushroll if necessary.

4. Clean the Vacuum Head:

1. Detach the Vacuum Head: Press the release button or lever to detach the vacuum head from the vacuum body.

2. Remove Obstructions: Inspect the vacuum head for any obstructions, such as hair, string, or debris. Remove any obstructions carefully.

3. Wipe the Vacuum Head: Use a damp cloth to wipe the vacuum head, removing any dirt or debris. Pay particular attention to the edges and corners where dirt tends to accumulate.

4. Dry the Vacuum Head: Allow the vacuum head to air dry completely before reattaching it to the vacuum body.

5. Clean the Hose:

1. Detach the Hose: Disconnect the hose from the vacuum body by pressing the release button or lever.

2. Inspect the Hose: Check the hose for any kinks or blockages. If you notice any obstructions, use a long, thin object, such as a broom handle or a vacuum cleaner hose attachment, to clear the blockage.

3. Wipe the Hose: Use a damp cloth to wipe the exterior of the hose, removing any dirt or debris.

4. Dry the Hose: Allow the hose to air dry completely before reattaching it to the vacuum body.

6. Clean the Filters:

1. Locate the Filters: Shark Professional vacuums typically have two filters: a pre-motor filter and a post-motor filter. The pre-motor filter is located behind the dust cup, while the post-motor filter is usually located near the exhaust vent.

2. Remove the Filters: Carefully remove both filters from the vacuum.

3. Rinse the Filters: Rinse the filters under lukewarm water until the water runs clear. Avoid using hot water or harsh detergents.

4. Air Dry the Filters: Allow the filters to air dry completely before reinstalling them. Do not use a dryer or heat source to speed up the drying process.

7. Reassemble the Vacuum:

1. Reattach the Filters: Once the filters are completely dry, reinstall them in the vacuum.

2. Reattach the Hose: Connect the hose to the vacuum body by aligning the connection points and pushing them together until they snap into place.

3. Reattach the Vacuum Head: Align the vacuum head with the vacuum body and push it until it clicks into place.

4. Reattach the Dust Cup: Insert the dust cup into the vacuum and press the release button or lever to secure it in place.

Recommendations: Maintaining a Clean Shark Professional Vacuum

Regularly cleaning and maintaining your Shark Professional vacuum is essential for ensuring its optimal performance and longevity. By following the steps outlined in this guide, you can keep your vacuum operating at its best, providing you with a clean and comfortable home environment. Remember to check the manufacturer’s instructions for specific cleaning and maintenance guidelines that may apply to your particular Shark Professional vacuum model.

What You Need to Learn

1. How often should I clean my Shark Professional vacuum?

Aim to clean your Shark Professional vacuum after every use or at least once a week to prevent dirt and debris buildup. Additionally, clean the filters and brushroll monthly and replace them every 6-12 months, depending on usage.

2. What is the best way to clean the Shark Professional vacuum filters?

Rinse the filters under lukewarm water until the water runs clear. Avoid using hot water or harsh detergents, as they can damage the filters. Allow the filters to air dry completely before reinstalling them.

3. How do I know when to replace the Shark Professional vacuum brushroll?

Inspect the brushroll for signs of damage, such as worn or broken bristles. If the bristles are excessively worn or damaged, replace the brushroll to maintain optimal cleaning performance.