Discover The Secrets To A Spotless Home: How To Clean Your Shark Navigator Lift-away Vacuum Like A Pro

Maintaining a clean and well-functioning vacuum cleaner is essential for keeping your home free of dust, dirt, and allergens. The Shark Vacuum Navigator Lift Away is a popular choice for its powerful suction, versatile design, and easy-to-use features. However, like any appliance, it requires regular cleaning and maintenance to perform at its best. This comprehensive guide will provide you with step-by-step instructions on how to clean your Shark Vacuum Navigator Lift Away, ensuring it continues to operate efficiently and effectively.

1. Empty the Dust Cup Regularly

The first step in cleaning your Shark Vacuum Navigator Lift Away is to empty the dust cup regularly. A full dust cup can reduce suction power and cause the vacuum to overheat. To empty the dust cup, press the release button located on the top of the vacuum and pull the cup straight out. Empty the contents into a trash can and tap the cup against the side of the trash can to remove any lingering dust or debris.

2. Clean the Filter Regularly

The Shark Vacuum Navigator Lift Away has two filters that need to be cleaned regularly: the pre-motor filter and the HEPA filter. The pre-motor filter is located behind the dust cup, while the HEPA filter is located inside the vacuum cleaner. To clean the pre-motor filter, rinse it under running water until the water runs clear. Allow the filter to dry completely before reinstalling it. To clean the HEPA filter, tap it against a hard surface to remove loose dust and debris. If the HEPA filter is visibly dirty, rinse it under running water until the water runs clear. Allow the filter to dry completely before reinstalling it.

3. Clean the Brushroll

The brushroll is responsible for agitating the carpet and removing dirt and debris. Over time, hair, string, and other debris can wrap around the brushroll, reducing its effectiveness. To clean the brushroll, remove the bottom plate of the vacuum cleaner. Use a pair of scissors to cut away any hair or string that is wrapped around the brushroll. You can also use a vacuum cleaner attachment to remove loose dirt and debris from the brushroll.

4. Clean the Hose and Attachments

The hose and attachments of the Shark Vacuum Navigator Lift Away can also accumulate dirt and debris over time. To clean the hose, disconnect it from the vacuum cleaner and use a long, thin object, such as a dowel rod, to push any obstructions through the hose. You can also use a vacuum cleaner attachment to remove loose dirt and debris from the inside of the hose. To clean the attachments, use a damp cloth to wipe away any dirt or debris.

5. Check the Belts and Pulleys

The Shark Vacuum Navigator Lift Away has two belts and two pulleys that can wear out over time. If the belts or pulleys are worn or damaged, they can cause the vacuum cleaner to make noise or lose suction power. To check the belts and pulleys, remove the bottom plate of the vacuum cleaner. Inspect the belts for signs of wear or damage, such as cracks or fraying. Inspect the pulleys for signs of damage, such as rust or pitting. If the belts or pulleys are worn or damaged, they should be replaced.

6. Lubricate the Moving Parts

The moving parts of the Shark Vacuum Navigator Lift Away should be lubricated regularly to ensure smooth operation and prevent wear and tear. To lubricate the moving parts, use a light oil, such as sewing machine oil or mineral oil. Apply a small amount of oil to the bearings, gears, and other moving parts. Avoid using too much oil, as this can attract dirt and debris.

7. Store the Vacuum Cleaner Properly

When you are finished cleaning your Shark Vacuum Navigator Lift Away, store it in a cool, dry place. Avoid storing the vacuum cleaner in direct sunlight, as this can damage the plastic parts. You should also store the vacuum cleaner upright to prevent the belts and pulleys from becoming stretched or damaged.

Wrapping Up: Keep Your Vacuum Running Smoothly

By following these simple steps, you can keep your Shark Vacuum Navigator Lift Away clean and well-maintained, ensuring it continues to perform at its best. Regular cleaning and maintenance will extend the life of your vacuum cleaner and save you money in the long run.

Frequently Discussed Topics

1. How often should I clean the dust cup?

You should empty the dust cup after each use or when it is about two-thirds full.

2. How often should I clean the filters?

You should clean the pre-motor filter every month and the HEPA filter every six months.

3. How often should I clean the brushroll?

You should clean the brushroll every three to six months.

4. How often should I check the belts and pulleys?

You should check the belts and pulleys every six months or more often if you use the vacuum cleaner frequently.

5. How often should I lubricate the moving parts?

You should lubricate the moving parts every six months or more often if you use the vacuum cleaner frequently.