What To Know
- Once the filters are clean or replaced, reinstall them in your vacuum cleaner according to the instructions in your user manual.
- If you find any blockages in the hose, use a long, thin object, such as a broom handle or a wire coat hanger, to push the obstruction out.
- Once the brush roll is clean, reinstall it in your vacuum cleaner according to the instructions in your user manual.
Is your Bissell vacuum cleaner struggling to pick up dirt and debris, leaving you frustrated with its lack of suction power? Clogged filters, hoses, and rotating brush rolls can be the culprits behind this frustrating issue. But fear not; unclogging your Bissell vacuum cleaner is a relatively simple task that can be accomplished with a few basic tools and a bit of elbow grease. In this comprehensive guide, we will walk you through the step-by-step process of unclogging your Bissell vacuum cleaner, ensuring it operates at peak performance once again.
1. Identifying the Clog:
Before you start unclogging your vacuum cleaner, it’s essential to identify the source of the clog. Check the following areas:
1. Dustbin: Empty the dustbin and inspect it for any blockages.
2. Filters: Clean or replace the filters, as clogged filters can restrict airflow.
3. Hose: Look for kinks or obstructions in the hose that may be impeding suction.
4. Rotating Brush Roll: Examine the rotating brush roll for tangled hair, string, or other debris that may be causing it to jam.
2. Unclogging the Dustbin:
1. Empty the Dustbin: Open the dustbin and empty its contents into a trash can.
2. Inspect the Dustbin: Check for any blockages or obstructions inside the dustbin, such as large pieces of debris or a clogged filter.
3. Clean the Dustbin: Use a damp cloth to wipe the inside of the dustbin, removing any dust or debris.
4. Reattach the Dustbin: Once the dustbin is clean and dry, reattach it securely to the vacuum cleaner.
3. Cleaning or Replacing Filters:
1. Locate the Filters: Different Bissell vacuum cleaner models may have different filter locations. Consult your vacuum cleaner’s user manual to find the specific location of the filters.
2. Remove the Filters: Follow the instructions in your user manual to remove the filters from your vacuum cleaner.
3. Clean the Filters: Washable filters can be cleaned with warm, soapy water. Rinse them thoroughly and allow them to dry completely before reinstalling them. Disposable filters should be replaced with new ones.
4. Reinstall the Filters: Once the filters are clean or replaced, reinstall them in your vacuum cleaner according to the instructions in your user manual.
4. Unclogging the Hose:
1. Disconnect the Hose: Detach the hose from the vacuum cleaner body.
2. Inspect the Hose: Look for kinks, twists, or blockages in the hose.
3. Straighten the Hose: If the hose is kinked or twisted, straighten it out gently.
4. Clear Obstructions: If you find any blockages in the hose, use a long, thin object, such as a broom handle or a wire coat hanger, to push the obstruction out.
5. Reattach the Hose: Once the hose is unclogged, reattach it to the vacuum cleaner body.
5. Unclogging the Rotating Brush Roll:
1. Remove the Rotating Brush Roll: Consult your vacuum cleaner‘s user manual for instructions on how to remove the rotating brush roll.
2. Inspect the Rotating Brush Roll: Look for tangled hair, string, or other debris wrapped around the brush roll.
3. Clean the Rotating Brush Roll: Use scissors to carefully cut away any tangled hair or string. You can also use a damp cloth to wipe the brush roll clean.
4. Reinstall the Rotating Brush Roll: Once the brush roll is clean, reinstall it in your vacuum cleaner according to the instructions in your user manual.
6. Testing the Vacuum Cleaner:
1. Turn on the Vacuum Cleaner: Plug in the vacuum cleaner and turn it on.
2. Test the Suction Power: Test the suction power of the vacuum cleaner by running it over a small area of carpet or flooring.
3. Adjust the Settings: If the suction power is still weak, try adjusting the vacuum cleaner‘s settings to a higher power level.
7. Regular Maintenance:
To prevent future clogs and ensure optimal performance, follow these regular maintenance tips:
1. Empty the Dustbin Regularly: Empty the dustbin after each use or when it is about two-thirds full.
2. Clean or Replace Filters Regularly: Clean washable filters every month and replace disposable filters every three to six months.
3. Inspect and Clean the Rotating Brush Roll Regularly: Inspect the rotating brush roll for tangled hair or debris every month and clean it as needed.
4. Store the Vacuum Cleaner Properly: Store the vacuum cleaner in a cool, dry place when not in use.
Wrapping Up:
By following these simple steps, you can effectively unclog your Bissell vacuum cleaner and restore its suction power. Regular maintenance will help prevent future clogs and keep your vacuum cleaner operating at peak performance for years to come. Happy cleaning!
Questions We Hear a Lot
1. Why is my Bissell vacuum cleaner not picking up dirt?
Clogged filters, hoses, or rotating brush rolls can cause your Bissell vacuum cleaner to lose suction power and not pick up dirt effectively.
2. How often should I clean the filters in my Bissell vacuum cleaner?
Washable filters should be cleaned every month, while disposable filters should be replaced every three to six months.
3. How do I unclog the rotating brush roll on my Bissell vacuum cleaner?
To unclog the rotating brush roll, remove it from the vacuum cleaner and use scissors to carefully cut away any tangled hair or string. You can also use a damp cloth to wipe the brush roll clean.
