What To Know
- Use a long, thin object, such as a broom handle or a straightened wire hanger, to dislodge any clogs from the hose or wand.
- If the clog is stubborn, you may need to remove the hose or wand from the vacuum and rinse it with water.
- If the motor is defective, you may need to take the vacuum to an authorized repair center or consider replacing the vacuum if the repair cost is high.
Pushing your Bissell vacuum should be a breeze, not a struggle. However, if you find yourself exerting extra effort to maneuver your vacuum, it’s time to investigate the underlying causes. From clogged filters to worn-out belts, various factors can contribute to the difficulty in pushing your Bissell vacuum. In this comprehensive guide, we’ll delve into the potential reasons behind this issue and provide step-by-step solutions to restore your vacuum’s smooth operation.
1. Obstructed Filter: A Common Culprit
A clogged filter is one of the most common reasons why your Bissell vacuum might be hard to push. A dirty filter restricts airflow, causing the vacuum to work harder and making it more challenging to push.
Solution:
1. Locate the filter housing, typically situated near the dirt tank.
2. Open the housing and remove the filter.
3. Rinse the filter thoroughly under lukewarm water until the water runs clear.
4. Allow the filter to dry completely before reinstalling it.
2. Full Dirt Tank: A Heavy Burden
An overflowing dirt tank adds unnecessary weight to your vacuum, making it harder to push. Regularly emptying the dirt tank ensures that your vacuum operates at its optimal performance.
Solution:
1. Locate the dirt tank release button or latch.
2. Empty the contents of the dirt tank into a trash can.
3. Rinse the dirt tank with water if necessary and allow it to dry thoroughly before reattaching it.
3. Worn-Out Belt: A Critical Power Transmitter
A worn-out belt can hinder the proper functioning of your Bissell vacuum. It can slip or break, causing the vacuum to lose power and become difficult to push.
Solution:
1. Unplug the vacuum and turn it upside down.
2. Locate the belt cover, usually secured by screws or clips.
3. Remove the belt cover and inspect the belt for signs of wear, such as cracks or fraying.
4. If the belt is damaged, replace it with a new one of the same size and type.
4. Dirty Brush Roll: A Hairy Obstacle
Hair, pet fur, and debris can wrap around the brush roll, hindering its rotation and making it harder to push the vacuum.
Solution:
1. Turn off and unplug the vacuum.
2. Flip the vacuum over and locate the brush roll cover.
3. Remove the brush roll cover and detach the brush roll.
4. Use scissors or a utility knife to carefully cut away any hair or debris wrapped around the brush roll.
5. Clean the brush roll with a damp cloth and allow it to dry completely before reattaching it.
5. Clogged Hose or Wand: A Blocked Path
A clog in the hose or wand can restrict airflow, making it difficult to push the vacuum. Debris, such as dust, pet hair, or small objects, can accumulate and cause a blockage.
Solution:
1. Disconnect the hose from the vacuum and check for any visible obstructions.
2. Use a long, thin object, such as a broom handle or a straightened wire hanger, to dislodge any clogs from the hose or wand.
3. If the clog is stubborn, you may need to remove the hose or wand from the vacuum and rinse it with water.
6. Faulty Motor: A Powerhouse in Distress
A malfunctioning motor can lead to decreased suction power, making it harder to push the vacuum. This issue typically requires professional repair or replacement.
Solution:
1. Contact Bissell customer support to troubleshoot the motor issue.
2. If the motor is defective, you may need to take the vacuum to an authorized repair center or consider replacing the vacuum if the repair cost is high.
7. Worn-Out Wheels: The Unsung Heroes
Worn-out wheels can make it difficult to maneuver your vacuum, especially on thick carpets or uneven surfaces.
Solution:
1. Inspect the wheels for signs of wear, such as cracks or flat spots.
2. If the wheels are worn, replace them with new ones of the same size and type.
Wrapping Up: A Smooth Vacuuming Experience Awaits
By addressing the potential causes discussed in this comprehensive guide, you can restore your Bissell vacuum’s smooth operation and make vacuuming a hassle-free task once again. Remember to regularly maintain your vacuum by cleaning the filters, emptying the dirt tank, and checking for any signs of wear or damage. With proper care and maintenance, your Bissell vacuum will continue to provide reliable cleaning performance for years to come.
Frequently Discussed Topics
Q: Why is my Bissell vacuum suddenly hard to push?
A: A sudden increase in pushing difficulty can be caused by a clogged filter, a full dirt tank, or a worn-out belt. Check and address these issues to resolve the problem.
Q: How often should I clean the filter in my Bissell vacuum?
A: It’s recommended to clean the filter after every use or at least once a week to maintain optimal vacuum performance.
Q: Can I use a generic replacement belt for my Bissell vacuum?
A: It’s best to use a genuine Bissell replacement belt to ensure proper fit and performance. Using a generic belt may void your warranty and potentially cause damage to your vacuum.
