What To Know
- Another potential cause for your Shark vacuum blowing air out is a blockage in the hose or wand.
- If you find any obstructions, use a long, thin object like a broom handle or a vacuum hose attachment to dislodge and remove the blockage.
- This can occur if the vacuum is used continuously for an extended period or if there is a blockage in the airflow path.
If your Shark vacuum is blowing air out instead of sucking up dirt and debris, it can be a frustrating experience. But don’t worry, in most cases, this issue can be easily fixed with a few simple troubleshooting steps. In this blog post, we will delve into the potential causes behind this problem and provide comprehensive solutions to get your Shark vacuum back to its optimal performance.
1. Clogged Filter
A clogged filter is one of the most common reasons why a Shark vacuum might blow air out. When the filter is blocked, it restricts airflow, causing the vacuum to lose suction and blow air instead.
Solution:
1. Locate the Filter: Identify the filter location on your Shark vacuum. It is typically situated either at the top or bottom of the vacuum cleaner.
2. Remove and Clean the Filter: Once you’ve located the filter, remove it from the vacuum. Rinse it thoroughly under running water until the water runs clear. Allow the filter to air dry completely before reinstalling it.
3. Replace the Filter if Necessary: If the filter is damaged or excessively dirty, it’s best to replace it with a new one. Refer to your Shark vacuum‘s user manual for specific filter replacement instructions.
2. Blocked Hose or Wand
Another potential cause for your Shark vacuum blowing air out is a blockage in the hose or wand. Obstructions can prevent proper airflow, leading to reduced suction and air blowing out of the vacuum.
Solution:
1. Inspect the Hose and Wand: Carefully examine the hose and wand for any visible blockages, such as dirt, hair, or debris.
2. Remove Blockages: If you find any obstructions, use a long, thin object like a broom handle or a vacuum hose attachment to dislodge and remove the blockage.
3. Clean the Hose and Wand: Once the blockage is removed, clean the hose and wand thoroughly to ensure there are no remaining particles or debris.
3. Faulty Belt or Brushroll
A worn-out or broken belt or brushroll can also cause your Shark vacuum to blow air out. These components play a crucial role in the vacuum’s suction and cleaning performance.
Solution:
1. Inspect the Belt and Brushroll: Check the belt and brushroll for signs of wear, damage, or breakage. Look for cracks, tears, or fraying on the belt, and ensure the brushroll is rotating smoothly.
2. Replace the Belt or Brushroll: If the belt or brushroll is damaged, it needs to be replaced. Refer to your Shark vacuum‘s user manual for specific instructions on how to replace these components.
4. Dirty or Full Dust Cup
A full or dirty dust cup can impede airflow and cause your Shark vacuum to blow air out. When the dust cup is full, it restricts the vacuum’s ability to collect dirt and debris, leading to reduced suction and air blowing out.
Solution:
1. Empty the Dust Cup: Regularly empty the dust cup after each use or when it reaches the “Max” fill line.
2. Clean the Dust Cup: Periodically wash the dust cup with warm, soapy water. Allow it to dry thoroughly before reinstalling it.
5. Overheating Motor
In some cases, your Shark vacuum might blow air out due to an overheated motor. This can occur if the vacuum is used continuously for an extended period or if there is a blockage in the airflow path.
Solution:
1. Allow the Vacuum to Cool Down: If you suspect the motor is overheated, turn off the vacuum and let it cool down for at least 30 minutes.
2. Check for Blockages: Inspect the vacuum for any blockages that may be restricting airflow. Clean or remove any obstructions.
3. Use the Vacuum in Short Intervals: Avoid using the vacuum continuously for more than 30 minutes at a time. Allow it to cool down in between use to prevent overheating.
6. Leaking Hose or Wand
A leak in the hose or wand can also cause your Shark vacuum to blow air out. When there is a leak, air escapes from the vacuum, reducing its suction power and causing it to blow air instead of sucking up dirt.
Solution:
1. Inspect the Hose and Wand: Carefully examine the hose and wand for any visible leaks or tears.
2. Seal the Leak: If you find a leak, you can temporarily seal it using duct tape or a similar adhesive. However, it’s best to replace the damaged hose or wand to ensure long-term performance.
7. Faulty Motor or Electrical Issue
In rare cases, a faulty motor or an electrical issue might be the underlying cause of your Shark vacuum blowing air out. These issues are typically more complex and may require professional repair or replacement.
Solution:
1. Contact Shark Support: If you suspect a faulty motor or an electrical issue, it’s best to contact Shark customer support or an authorized repair center for assistance.
Solved: Shark Vacuum Blowing Air Out Issue
With these troubleshooting steps, you should be able to resolve the issue of your Shark vacuum blowing air out. If the problem persists after trying all the suggested solutions, it’s recommended to contact Shark customer support or take the vacuum to an authorized repair center for further diagnosis and repair.
What People Want to Know
Q: Why is my Shark vacuum blowing air out instead of sucking up dirt?
A: There are several potential causes for this issue, including a clogged filter, blocked hose or wand, faulty belt or brushroll, dirty or full dust cup, overheating motor, leaking hose or wand, or a faulty motor or electrical issue.
Q: How do I fix my Shark vacuum that is blowing air out?
A: The solution depends on the underlying cause of the issue. You can try troubleshooting steps such as cleaning or replacing the filter, checking for blockages, replacing the belt or brushroll, emptying and cleaning the dust cup, allowing the vacuum to cool down, sealing any leaks, or contacting Shark customer support for assistance.
Q: How can I prevent my Shark vacuum from blowing air out in the future?
A: To prevent this issue from recurring, regularly maintain your Shark vacuum by cleaning the filter, emptying the dust cup, inspecting for blockages, and replacing worn-out components such as the belt or brushroll. Additionally, avoid using the vacuum continuously for extended periods and allow it to cool down in between use.
